The effect of Sb on the electrical and magnetic properties of Ni-Zn ferrites prepared by sol-gel autocombustion method

No Thumbnail Available
Date
2013-10-01
Authors
Praveena, K.
Srinath, S.
Journal Title
Journal ISSN
Volume Title
Publisher
Abstract
Polycrystalline Ni-Zn ferrites with a well-defined composition of Ni 0.4Zn0.6Fe2-xSbxO4 synthesized using sol-gel method. Morphological characterizations on the prepared samples were performed by high resolution transmission electron and field emission scanning electron microscopy. The powders were densified using microwave sintering method. The room temperature complex permittivity (ε′ and ε″) and permeability (μ′ and μ″) were measured over a wide frequency range from 1 MHz-1.8 GHz. The real part of permittivity varies as 'x' concentration increases and the resonance frequency was observed at much higher frequencies and there is a significant decrease in the loss factor (tanδ). The electrical resistivity and permeability of NiZn ferrites increased with an increase of Sb content. As the concentration of 'x' increases from 0 to 0.08 the saturation magnetisation decreases. The saturation magnetization (Ms) ≈ 52.211 A.m2/Kg for x = 0 at room temperature. The room temperature electro paramagnetic resonance (EPR) were studied. © 2013 Springer Science+Business Media New York.
Description
Keywords
Dielectric constant, Electrical resistivity, EPR, Ferrites, Magnetic properties, Microwave sintering
Citation
Journal of Electroceramics. v.31(1-2)